Techdinamics has launched a free Shipping Savings Calculator to help U.S. shippers estimate how much their small parcel shipping could cost with discounted rates available through techSHIP. By comparing current shipping costs with the details of a shipper’s package profile, the calculator provides an initial view of estimated savings.
Shipping costs can be difficult to assess at a glance. Monthly spend may show the total, but it does not always make it easy to understand the cost of each label, the impact of shipment zones, or the effect of different carrier rates.
Advanced courier optimization analyses run by Techdinamics have identified potential savings of 18.2%, 23.1%, and 28.3% of shipping spend for a third-party logistics provider (3PL), a brand, and a retailer.
The Techdinamics Shipping Savings Calculator is a free tool that estimates small parcel shipping savings for U.S. shippers using their current shipping details and techSHIP rates. It applies the courier optimization approach Techdinamics has developed through years of detailed shipping analyses, turning it into a quick estimate users can run on their own.
The tool turns a few shipping inputs into two stages of results. Users see estimated savings per package, monthly savings, and savings rate immediately, then can enter a corporate email to view optimized cost per label, a cost breakdown by zone, and average transit time.
These estimates give operations and finance teams a starting point for reviewing carrier spend. Instead of looking only at a monthly total, they can compare cost and transit measures tied to their shipping profile.
The calculator uses the shipping information entered by the user to run a cost comparison for U.S. small parcel shipments.
Enter a main ship-from U.S. ZIP code. If you ship from more than one location, use the ZIP code of the facility that ships the most packages, or run a separate estimate for each location.
Select current couriers. Select the couriers you currently use from your main location.
Add monthly package volume. The calculator requires a minimum monthly volume of 4,000 packages.
Enter monthly shipping spend. Enter current monthly shipping spend without surcharges.
Provide the average package billing weight. Enter the average billing weight in pounds.
Choose the main package type.
Calculate the estimate. The tool compares current cost information with discounted small parcel rates available through techSHIP. Savings per package, monthly savings, and savings rate appear immediately.
Enter your corporate email to view additional results. Unlock optimized cost per label, the cost breakdown by zone, and average transit time. Results can be downloaded as an image to share with your team.
The calculator is an estimate, not a guarantee of savings. Its purpose is to provide an initial cost comparison based on the information entered.
The Shipping Savings Calculator presents results in two stages.
Immediately after calculation, users see three estimated savings measures:
After unlocking, users can view two additional results:
Techdinamics also runs detailed courier optimization analyses at the shipment level. While the calculator works with summary figures such as monthly volume, spend, and average billing weight, a detailed analysis reviews each shipment individually, using a shipper’s full shipment-level data. You can request one from our shipping experts. The examples below show the kind of cost differences this closer review can identify.
These analyses cover shippers of different types and sizes. Here are three recent examples: a mid-sized 3PL, a fashion accessories brand, and an online merchandise retailer. For the 3PL and the brand, the analyses identified optimization opportunities using rates through a multi-carrier shipping network partner of Techdinamics. For the retailer, they identified opportunities using a mix of USPS and regional last-mile carrier options. Each analysis used one month of shipment data, and annual savings are projected from that month.
|
Metric |
3PL |
Fashion & Accessories Brand |
Online merchandise retailer |
|
Proposed carrier options |
Multi-carrier network partner |
Multi-carrier network partner |
USPS and regional last-mile carriers |
|
Shipments analyzed |
14,155 |
45,747 |
8,498 |
|
Shipments with savings |
4,983 |
38,294 |
5,206 |
|
Current spend |
$289,269.18 |
$222,710.28 |
$64,788.78 |
|
Proposed spend |
$236,680.67 |
$171,266.99 |
$46,470.66 |
|
Potential savings identified |
$52,588.51 |
$51,443.29 |
$18,318.12 |
|
Savings rate |
18.2% |
23.1% |
28.3% |
|
Current cost per parcel |
$20.44 |
$4.87 |
$7.62 |
|
Proposed cost per parcel |
$16.72 |
$3.74 |
$5.47 |
|
Savings per parcel |
$3.72 |
$1.12 |
$2.16 |
|
Projected annual savings |
$631,062.12 |
$617,319.48 |
$219,817.44 |
About 35% of the 3PL’s shipments, 84% of the fashion accessories brand’s shipments, and 61% of the retailer’s shipments had identified savings. The results show that the share of shipments with potential savings does not depend on volume alone.
The 3PL had the highest cost per parcel and the largest savings per parcel, at $3.72. The fashion accessories brand had a much lower cost per parcel, but with more than three times the 3PL’s shipment volume, its $1.12 savings per parcel added up to $51,443.29, close to the 3PL’s $52,588.51.
Results vary by shipping volume, zones, package profile, and current rates.
The Techdinamics Shipping Savings Calculator is for U.S. shippers that send at least 4,000 small parcel packages per month and want an initial estimate of shipping savings.
It can be useful for teams reviewing carrier costs, preparing an internal discussion about shipping spend, or deciding whether to explore rates available through techSHIP.
Users can compare estimated savings per package and per month, then review the zone-based cost breakdown and average transit time as part of the same analysis.
techSHIP is Techdinamics’ multi-carrier shipping solution for small parcel and LTL shipping.
The calculator provides an initial view of how a shipper’s current profile may compare with discounted small parcel rates available through techSHIP.
The results can help make a follow-up conversation more specific by grounding it in the shipper’s own cost inputs and shipping profile.
Shipping costs deserve a closer look when parcel volume and monthly spend add up. Try the Techdinamics Shipping Savings Calculator, then contact our team to discuss your results.
━━━━━━━━
The Techdinamics Shipping Savings Calculator is a free tool for U.S. small parcel shippers. It compares the shipping information entered by a user with discounted small parcel rates available through techSHIP to estimate savings per package and per month, along with cost and transit measures.
techSHIP is Techdinamics’ multi-carrier shipping solution for small parcel and LTL shipping. It supports carrier rate selection, label generation, tracking, and parcel audit in one platform. The Shipping Savings Calculator compares a shipper’s current costs with discounted small parcel rates available through techSHIP. Learn more about techSHIP.
Yes. The Shipping Savings Calculator is free to use. Savings per package, monthly savings, and savings rate appear without any sign-up. To see optimized cost per label, the cost breakdown by zone, and average transit time, users enter a corporate email.
To use the calculator, you need a main ship-from U.S. ZIP code, current couriers, monthly package volume, monthly shipping spend without surcharges, average package billing weight in pounds, and a main package type. The calculator requires a minimum monthly volume of 4,000 packages.
The calculator uses one main ship-from ZIP code per estimate. If you ship from several facilities, enter the ZIP code of the location that ships the most packages. You can also run a separate estimate for each location, using that facility’s own monthly volume and shipping spend rather than company-wide totals. Each estimate requires a minimum of 4,000 packages per month.
The calculator shows savings per package, monthly savings, savings rate, an optimized cost per label, a cost breakdown by zone, and average transit time.
No. Savings per package, monthly savings, and savings rate appear immediately after the calculation. A corporate email is required to view the optimized cost per label, the cost breakdown by zone, and average transit time.
Savings depend on each shipper’s profile. In three recent Techdinamics analyses of real shipping data for a 3PL, a fashion accessories brand, and an online merchandise retailer, identified potential savings were 18.2%, 23.1%, and 28.3% of shipping spend. The calculator provides an initial estimate based on a user’s own inputs.
No. The Shipping Savings Calculator provides average estimates based on the details entered and the rates considered in the analysis. The results are an initial cost comparison and do not guarantee final shipping costs or savings.
Yes. The calculator is for U.S. small parcel shipments only. Users enter a main ship-from U.S. ZIP code as part of the analysis, along with information about their current couriers, package volume, spend, billing weight, and package type.
━━━━━━━━
Techdinamics provides order management and multi-carrier shipping technology for 3PLs, brands, and retailers. Its core products are techOMS, an order management system that connects warehouse management systems with sales channels, and techSHIP, a multi-carrier shipping solution for small parcel and LTL shipping.